Product Introduction: A gear-type oil pump made of high-strength cast iron with precision-machined steel gears. It features a dual-gear design, integrated mounting flange, and pressure relief valve. The housing is marked with part numbers for traceability, and the gears are surface-hardened for wear resistance.

Product Function: Draws oil from the engine oil pan and delivers it under pressure to lubricate critical engine components, including the crankshaft, connecting rods, and camshaft. The pressure relief valve maintains optimal oil pressure, preventing system overload and ensuring continuous lubrication even under extreme operating conditions.

Engine Oil Pump 4939588 for Cummins 6BT 6BT5.9 6BTAA QSB6.7 ISB ISDe – Premium Aftermarket Replacement

When your Cummins engine demands consistent oil pressure and reliable lubrication under heavy-duty conditions, this Engine Oil Pump 4939588 delivers exactly what the original spec calls for — without the OEM price tag. Engineered as a direct-fit replacement for Cummins 6BT, 6BT5.9, 6BTAA, QSB6.7, ISB, and ISDe engine platforms, this oil pump maintains the precise flow rates and pressure tolerances your fleet depends on. METTLEAD Truck Parts manufactures this pump under strict quality control protocols, ensuring every unit leaves the factory ready to perform from the first cold start to the 500,000th mile.

Why This Engine Oil Pump 4939588 Outperforms Generic Alternatives

Not all aftermarket oil pumps are created equal. This Cummins 6BT oil pump is reverse-engineered from OE specifications, with dimensional accuracy verified at every production stage. Here is what that precision means for your bottom line:

• Consistent Oil Pressure Delivery: Maintains 40–70 PSI across operating RPM ranges, protecting critical bearing surfaces in Cummins 6BT5.9 and QSB6.7 engines from premature wear.
• OE-Grade Gear Tolerances: Internal gear clearances held to ±0.02mm, minimizing internal leakage and maximizing volumetric efficiency — even after 300,000+ km of service.
• High-Wear Surface Treatment: Pump gears and housing contact surfaces undergo hardening treatment (HRC 58-62) to resist abrasive particles common in heavy-duty diesel applications.
• Direct Bolt-On Installation: Matches OEM mounting points, port locations, and drive coupling dimensions. No gasket modifications, no adapter plates, no guesswork.
• Extended Service Life: Bench-tested to exceed 4,000 hours of continuous operation under simulated load conditions before any measurable performance degradation.

Technical Specifications – Engine Oil Pump 4939588

Application Scenarios – Where This Oil Pump Works Hardest

The Engine Oil Pump 4939588 serves across a wide spectrum of commercial and industrial applications powered by Cummins B-series and QSB engines. Here are the real-world scenarios where this pump proves its value daily:

On-Highway Commercial Trucks

Medium-duty trucks running Cummins 6BT5.9 and ISB engines — including the Dongfeng Tianjin, Foton Auman, and various North American Class 6–7 chassis — rely on consistent oil pressure during long-haul and regional delivery cycles. This pump keeps oil circulating through turbocharger bearings, connecting rod journals, and cam followers even during extended idling periods at loading docks.

Construction and Mining Equipment

Wheel loaders, excavators, and compactors equipped with Cummins QSB6.7 engines face extreme dust ingestion and shock-loading conditions. The hardened gear surfaces in this oil pump resist accelerated wear from abrasive contamination that typically shortens generic pump life by 30–40%.

Power Generation Sets

Stationary gensets running Cummins 6BTAA engines at continuous or prime-rated duty need an oil pump that delivers unwavering pressure during 24/7 operation. This pump’s tight internal clearances ensure stable oil film thickness across all bearing surfaces — even at elevated oil temperatures common in tropical generator installations.

Agricultural Machinery

Tractors and harvesters powered by Cummins ISDe engines operate through seasonal peaks of 14–18 hour daily run times. This oil pump maintains performance throughout harvest season without the mid-season failures that plague lower-quality alternatives.

OEM/ODM Capability – Your Brand, Our Engineering

METTLEAD Truck Parts understands that distributors and fleet operators need more than just a part — they need a supply chain partner. Our manufacturing facility offers flexible customization options for the Engine Oil Pump 4939588:

• White-Label Packaging: Your brand name, your logo, your part number on the box. We produce; you own the customer relationship.
• Custom Packaging Design: Choose your box dimensions, insert materials, and labeling specifications. We accommodate retail-ready, bulk, and export packaging configurations.
• MOQ Flexibility: Starting from 50 pieces for initial trial orders, scaling to 10,000+ units for established distribution programs.
• Quality Documentation: Full material certifications, dimensional inspection reports, and performance test data included with each shipment upon request.
• Private Labeling for Multiple SKUs: Bundle this oil pump with our full range of Cummins engine components under one unified brand identity.

Client Case Study – Engine Oil Pump 4939588 in a Middle Eastern Fleet Operation

A fleet management company in Saudi Arabia operating 220 Cummins 6BT5.9-powered trucks across desert logistics routes was experiencing premature oil pump failures every 80,000–100,000 km with their existing aftermarket supplier. Sand-laden air and ambient temperatures exceeding 50°C were accelerating internal wear beyond acceptable limits.

After switching to the METTLEAD Engine Oil Pump 4939588, the fleet recorded the following results over a 14-month evaluation period:

• Average pump service life extended to 180,000+ km — an 80% improvement over the previous supplier’s product.
• Zero unscheduled roadside failures attributed to oil pressure loss across the entire fleet during the evaluation.
• Oil pressure consistency improved by 12% as measured at routine 30,000 km maintenance intervals.
• Procurement cost reduced by 23% compared to OEM Cummins genuine parts, with comparable performance data.

The fleet’s procurement director confirmed a 3-year supply agreement for the Engine Oil Pump 4939588, alongside 14 additional METTLEAD Cummins engine part SKUs.

Frequently Asked Questions – Engine Oil Pump 4939588

Is this oil pump a direct replacement for the original Cummins 4939588?

Yes. This Engine Oil Pump 4939588 matches all OEM dimensional specifications, mounting points, and drive coupling interfaces. It installs in the same position using the same hardware as the original Cummins pump — no modifications to the engine block or timing cover required.

What causes an engine oil pump to fail on Cummins 6BT engines?

The most common failure modes include internal gear wear from contaminated oil (missed filter changes), cavitation damage from low oil levels, and relief valve sticking from sludge buildup. Running engines below minimum oil level or using incorrect viscosity grades accelerates internal clearance growth, reducing output pressure below safe bearing film requirements.

How do I know when the oil pump needs replacement on my Cummins ISB or QSB6.7?

Watch for low oil pressure warnings at idle (below 10 PSI at hot idle), metallic debris in the oil filter during service, knocking sounds from the main or rod bearings under load, and excessive oil temperature without other explanation. A pressure test at the gallery port will confirm whether the pump can still achieve rated output.

Does this oil pump fit both mechanical and electronic Cummins 6BT variants?

Yes. The oil pump mounts to the front gear housing and is driven by the crankshaft gear — this system is mechanically identical across both mechanical (6BT, 6BT5.9) and electronically-controlled (ISB, ISDe, QSB6.7) variants within the Cummins B-series family.

What is the recommended break-in procedure after installing a new Engine Oil Pump 4939588?

After installation, prime the pump with clean engine oil before first start. Run the engine at fast idle (1,000–1,200 RPM) for 5 minutes while monitoring oil pressure. Verify pressure reaches at least 25 PSI within 10 seconds of cranking. Avoid full-load operation for the first 30 minutes to allow the gear surfaces to seat properly against the housing.

Can I cross-reference this pump with other Cummins part numbers?

Absolutely. The 4939588 cross-references to several earlier and superseded Cummins numbers including 3937404, 3904374, 3906414, and 4939585. If your parts catalog lists any of these numbers for a 6BT, 6BT5.9, 6BTAA, QSB6.7, ISB, or ISDe application, this pump is the correct replacement.

Ready to Secure Your Supply of Engine Oil Pump 4939588?

Whether you need 50 pieces for a trial evaluation or 5,000 units for quarterly distribution, METTLEAD Truck Parts delivers competitive pricing, consistent quality, and lead times built for professional procurement timelines.

Get your quote today:

• Volume pricing for the Engine Oil Pump 4939588
• White-label and custom packaging options
• Full technical documentation and test reports
• Consolidated shipping with our complete Cummins engine parts catalog

Contact us now
to discuss your requirements with our technical sales team. We typically respond within 12 business hours with pricing and availability confirmation.