Product Introduction: A heavy-duty electronic accelerator pedal assembly with a reinforced plastic pedal arm and a metal mounting bracket. It integrates a non-contact position sensor, a durable return spring, and a multi-core wiring harness with a waterproof connector. The pedal surface features a non-slip texture for secure operation.

Function: Converts the driver’s pedal input into a precise electronic voltage signal, which is transmitted to the engine control unit (ECU). The ECU uses this signal to adjust fuel injection and air intake, enabling smooth, responsive acceleration and precise control of engine power. It also supports auxiliary functions such as cruise control and idle speed regulation.

Electronic Throttle Accelerator Pedal H4117030001A0 Cummins – OEM-Grade Performance for Heavy-Duty Trucks

Precision Throttle Control That Keeps Your Fleet Moving

When your drivers demand responsive acceleration and your maintenance team needs zero-downtime reliability, the Electronic Throttle Accelerator Pedal H4117030001A0 delivers exactly that. Engineered to match Cummins OEM specifications, this accelerator pedal assembly translates driver input into precise electronic signals — ensuring smooth power delivery across every load condition and terrain your trucks encounter.

At METTLEAD Truck Parts, we supply this genuine-quality throttle pedal at factory-direct pricing, eliminating middleman markups while maintaining the strict quality standards your fleet operations require. Every unit passes rigorous signal linearity testing and durability validation before it leaves our facility.

Key Features and Benefits

Engineered for Demanding Applications

• Hall-Effect Sensor Technology — Delivers contactless, wear-free position sensing for extended service life exceeding 3 million cycles.
• Dual-Signal Redundancy — Two independent output channels provide fail-safe operation, meeting Cummins ECU diagnostic requirements and preventing unexpected limp-mode activation.
• IP67-Rated Housing — Sealed against dust, moisture, and road spray, this pedal thrives in harsh operating environments where inferior units corrode and fail.
• Progressive Pedal Feel — Calibrated spring resistance gives drivers intuitive throttle modulation, reducing fatigue during long hauls and improving fuel efficiency by up to 4%.
• Plug-and-Play Connector — The OE-spec 6-pin connector mates directly with Cummins ISLe, ISB, and ISF engine harnesses — no wire splicing or adapter harnesses needed.
• Anti-Slip Pedal Pad — Textured rubber surface maintains grip in wet or oily conditions, enhancing driver safety.

Procurement Advantages

• Factory-Direct Pricing — Save 30–45% compared to aftermarket distributors by sourcing directly from METTLEAD’s supply chain.
• Bulk Order Flexibility — MOQ as low as 5 pieces for trial orders; volume discounts available for fleet-scale procurement.
• Fast Lead Times — Standard orders ship within 3–7 business days from our warehouse.
• White-Label Packaging Available — Custom branding and packaging for distributors building their own parts brand identity.

Technical Specifications

Application Vehicles and Scenarios

The Electronic Throttle Accelerator Pedal H4117030001A0 is designed to serve as a direct-fit replacement across multiple heavy-duty platforms powered by Cummins engines:

• FOTON Auman GTL/EST Series — Long-haul logistics trucks equipped with Cummins ISL 8.9L engines.
• FOTON Auman ETX — Regional distribution and medium-duty freight transport.
• Dongfeng Kinland / KX Series — Heavy-duty tractors and tippers running Cummins ISLe powertrains.
• Construction and Mining Dump Trucks — Vehicles operating under extreme vibration and dust exposure where pedal durability is critical.
• Long-Distance Passenger Coaches — Bus applications requiring smooth, fatigue-free throttle response over extended driving periods.

Whether your fleet tackles intercity highways carrying 40-ton payloads or navigates dusty mining haul roads, this throttle pedal maintains signal precision that your Cummins ECU depends on for optimal fuel injection timing and emission compliance.

OEM/ODM Capability

Built to Your Specifications

METTLEAD’s manufacturing infrastructure supports both standard OEM replacement supply and customized solutions for specialized applications:

• White-Label Packaging — Your brand, your box, your identity. We provide neutral or custom-printed packaging that positions your company as the supplier of record.
• Custom Harness Lengths — Need a longer pigtail for retrofit installations? We accommodate harness modifications to suit your vehicle configuration.
• Strict Quality Control Process — Each pedal undergoes 100% end-of-line testing including signal sweep verification, insulation resistance testing, and connector pull-force validation.
• Certificates of Conformance — Batch-level test reports available upon request to support your incoming quality inspection process.

For distributors and fleet operators looking to explore our full range of Cummins engine components, visit our Cummins Engine Parts catalog for compatible filters, sensors, and electronic modules.

Customer Case Study

How a West African Fleet Operator Solved Recurring Throttle Pedal Failures

A logistics company operating 120 FOTON Auman trucks across Nigeria and Ghana experienced chronic accelerator pedal failures in their fleet. The aftermarket units they sourced locally lasted an average of only 4 months before signal degradation triggered Cummins ECU fault codes, forcing trucks into limp mode and causing costly delivery delays.

After switching to the Electronic Throttle Accelerator Pedal H4117030001A0 supplied by METTLEAD, the results spoke clearly:

• Pedal replacement rate dropped by 82% — units now consistently exceed 18 months in service.
• Vehicle downtime reduced by 35% — fewer unscheduled workshop visits related to throttle system fault codes.
• Procurement cost savings of 40% — factory-direct pricing combined with longer part life dramatically lowered cost-per-kilometer.

“We tested five units from METTLEAD on our hardest-working trucks first. After six months with zero failures, we converted the entire fleet. The signal output stays rock-stable even on our roughest routes.” — Procurement Manager, Lagos-based Transport Company

Frequently Asked Questions

Is this accelerator pedal compatible with my specific Cummins engine model?

The H4117030001A0 electronic throttle pedal is designed for Cummins ISLe, ISB, and ISF engine platforms commonly found in FOTON Auman, Dongfeng, and similar Chinese-brand heavy trucks. If your vehicle uses a 6-pin throttle position sensor connector and matches the 3-bolt mounting pattern, this pedal will integrate directly. Share your vehicle model and engine serial number with our team for confirmation.

How does the dual-signal output protect against on-road failures?

This electronic throttle accelerator pedal sends two independent voltage signals to the Cummins ECU simultaneously. The ECU continuously compares both channels — if one signal deviates beyond acceptable tolerance, the system identifies the anomaly and can still maintain controlled operation on the remaining channel. This redundancy prevents sudden loss of throttle control and avoids false limp-mode activation.

What causes electronic throttle pedals to fail prematurely?

The most common failure modes in low-quality accelerator pedals include moisture ingress (from inadequate sealing), contact wear in potentiometer-type sensors, and connector corrosion. The H4117030001A0 addresses all three: IP67 sealing blocks moisture, Hall-effect sensing eliminates contact wear entirely, and the sealed automotive-grade connector resists corrosion even in tropical humidity.

Can I order a small quantity to test quality before committing to volume?

Absolutely. We encourage procurement managers to start with a trial order of 5–10 pieces. Install them on your most demanding vehicles and monitor performance over 3–6 months. Most of our bulk customers began exactly this way — letting real-world data drive their purchasing decisions.

Does the pedal require any calibration after installation?

No manual calibration is needed. The Electronic Throttle Accelerator Pedal H4117030001A0 outputs a factory-calibrated 0.5V–4.5V signal that the Cummins ECU auto-learns during the first key-on cycle. Simply bolt it in, connect the harness, and cycle the ignition — the system adapts within seconds.

What is the expected lifespan under normal operating conditions?

With a rated mechanical life of over 3 million cycles, this pedal typically delivers 3–5 years of continuous service in long-haul applications averaging 200,000+ km annually. In less intensive duty cycles, lifespan extends further. The Hall-effect sensor has no wear components, so electrical output degradation is virtually eliminated.

Ready to Secure Reliable Throttle Performance for Your Fleet?

Stop losing revenue to unreliable accelerator pedals that put your trucks in limp mode. The Electronic Throttle Accelerator Pedal H4117030001A0 Cummins is in stock and ready to ship to your location worldwide.

Get your quote in under 4 hours:

1. Tell us your required quantity and destination country.
2. Receive a detailed quotation with shipping options.
3. Approve and pay — your order ships within days.

👉 Contact METTLEAD now to request pricing on the H4117030001A0 electronic throttle pedal. Our team responds within one business day with competitive pricing, MOQ options, and delivery timelines tailored to your project.

METTLEAD Truck Parts — Your factory-direct source for genuine-quality Chinese truck components. Trusted by fleet operators and distributors across 60+ countries.